Check out our Sessions tutorial for more details on how Sessions work.

Q: What are Sessions?

A: The quickest way to understand the Sessions area of Hopin is to think of rooms, groups or virtual roundtables within your event.

Q: What is the difference between Stage and Sessions?

A: Stage allows attendees to view only and have up to 5 people with video/audio on, run both pre-recorded or live video, and stream with RTMP. Sessions are more like breakout rooms or workshops, allowing up to 20 participants with video/audio on, where attendees can ask questions on video or join a roundtable, so it's very interactive.

Q: How many people can view a Session?

A: The maximum number of people who can watch a Session is 150-3000, depending on the number of speakers you have. A speaker is considered someone that comes on-screen during the session.

1 speaker: 3000 viewers maximum, 2 speakers: 1500 viewers maximum...20 speakers: 150 viewers maximum.

Basically, the more speakers you have for a session, the less amount of viewers you have for that session.

Tip: Max On-Screen and Viewer Limits

Q: How many people can participate in a session with their video/audio?

A: If you were to record a particular session, you can have up to 9 participants on screen (with video and audio). Any other person that joins that session will not be able to show up on screen, but will count as a viewer. If you have 8 speakers for a session, and one of them decides to share their screen, the screenshare will be counted as the 9th person.

For non-recorded sessions, you can have up to 20 people on screen with video and audio. Every other person would count as a viewer without audio and video.

Q: How do I leave a panel without leaving a Session?

A: Since the limit of participants on screen (with audio and video) is 9, for recorded sessions, it is good practice to free up a spot when someone has finished participating in a live panel. To do so simply click the 'Leave' button at the top right of a session's screen, this way the spot will be released for someone else to join while still being able to watch the session.
Note that turning audio/video off does not release one of the 9 spots. For moderated sessions, the moderator can free up spots by removing participants using the moderator tool at the bottom left of a session's screen.

Q: How do I create a session?

A: Go to your event dashboard > On the left-hand side, click on the Sessions tab > Click Add session.

Q: Where can I find the backstage of my session?

A: Sessions do not have backstages at this time. To speak/present in a session, click the sessions tab in the event and click the share audio and video button.

Q: Can I run my sessions alongside the stage?

A: Absolutely! All major segments of the event - stage, sessions, expo and networking - can be live at the same time.

Q: Who can watch a session?

A: You can set this to any of the 4 options:

  • Anyone - all attendees will be able to enter the session and watch
  • Private - private sessions will not be listed on the Sessions tab of the event and show up to organizers and invited attendees only
  • Specific ticket holders - only attendees with the specified tickets will be able to see the session on the list and to watch it.
  • Unlisted - no one will be able to see the Session in the Sessions area of the event. The organiser will have to share the session URL with attendees and speakers.

Q: Who can participate in a session?

A: You can set this to any of the 3 options:

  • Anyone - any of the event attendees can join your session and show up on the screen with their video/audio
  • Invite only - only the attendees whose names you type in the box below ‘Who can join’ can participate on screen
  • Moderated - you need to select a moderator. They will need to approve everyone who attempts to join the screen with audio and video.

Tip: How to add a moderator to a session.

Q: As an organizer, can I ‘force’ people to enter a session and remove them when I need them to enter another session?

A: This isn't possible at this time. The best workaround is to create a schedule. Scheduled sessions are hidden until 5 minutes before the scheduled time. The schedule is displayed on the registration and reception pages for the attendees to know what's happening per time. Also, for every scheduled segment, a 'NOW' way-finder is displayed boldly at the segment area for the attendees to know where and what's happening.

Q: How can I order the sessions?

A: The sessions with larger booth size will show up before the sessions with smaller booth size. You can set the order of the sessions with the same-sized booths by changing the number in the ‘Priority’ field. The lower the number, the higher up the session on the list.

Q: What are the video settings for the session?

A: The default settings are 1280✕720, 30 fps. You can lower these down in the session Advanced Settings to improve the session experience when there’s a lot of participants or bandwidth issues.

Q: What are the recommended image dimension for the session? (width x height)

A: For Large Sessions:

Recommended: 1500 x 750px (2:1 aspect ratio)

Minimum size: 1000 x 500px

For Medium Session

Recommended: 1500x600px (5:2 aspect ratio)

Minimum size: 800x320px

Q: Can attendees create their own sessions?

A: This is completely up to you as an organiser. If you select that option, they will be able to. Note that sessions created by attendees can’t be recorded.

Q: How do I know how many people are in a session?

A: In the top right corner of the video, you’ll be able to see how many people are participating with their video/audio and how many people are watching.

Q: How can I see who is in the session?

A: At the top right of the page, click on the people tab. Attendees currently in the sessions will have a green dot displayed by their name.

Q: Can you screen share in a session?

A: Yes, you can!

Q: Can presenters use their phones or tablets to connect or do they have to be at a computer to participate as a presenter in a session?

A: Attendees can use their mobile devices (phones or tablets) to watch a session. However, they are unable to screenshare on phones or tablets. If a presentation is needed, that cannot be done on mobile devices and a regular computer will be needed. Or, the speaker can send the presentation to someone else who will be at their computer.

Q: Can I record the session?

A: Yes. While creating or editing a session check the box “Do you want to record this session?” to record the session.

Note: Recording starts the moment someone participates in a session (goes on camera). If speakers leave and no one participates in a session for an hour, the recording will stop and will not resume. If a speaker returns in less than an hour, your recording will automatically clip the dead space. There may be a 1/2 second cut-off in between 2-hour recording segments.

Q: Can the event attendees access the event sessions after the event is over?

A: Once the end time of the event hits, the “virtual doors” close and nobody is able to see any information. You as an organizer are able to see the analytics and videos and can distribute those however you choose.

Q: Where are my Sessions recordings?

A: You can find recordings in the Sessions Summary tab of your event dashboard once the event is over.

Tip: How to access recordings

Q: How do I share recordings with my attendees and can I delete the recordings right after?

A: You can download your recordings, upload them to a cloud storage service like Dropbox, Google Drive, etc and send the link to your attendees. You can delete session recordings by deleting the session itself.

Q: Can I set prerecorded videos in a session?

A: You have the option to share YouTube videos in a session. Here’s a guide on that.

Q: Can I mute the audio of a participant/speaker for everyone?

A: Yes, you can mute the audio of a participant for everyone, but you cannot unmute the person. Only the speaker will be able to unmute their audio thereafter.

Q: I have a PDF file I want to share in a session, how can I do that?

A: We recommend that you upload it to Google Drive, Dropbox etc., get a shareable link and post it to the session chat, then pin it to the top. Only the organizer has access to pin chat messages. You can also make use of the Additional Information area when creating the session to place all files and other information.

Q: How many Sessions can I create?

A: There’s no limit to the number of sessions you can create. That means you can create and run an unlimited number of sessions in your event.

Q: We need to have 10 sessions running at the same time, is that ok?

A: Absolutely! There’s no limit to the number of the sessions you can run simultaneously.

Q: Can I create breakout sessions within a Session?

A: While this option is not available yet, you can create an unlimited number of sessions anytime during the event through the event dashboard. You can then direct your attendees to the respective sessions.

Q: I can see the Session in the Event dashboard but not in the Session Area in the event, what happened?

A: Here’s what could have happened:

  • Your session is connected to a schedule and is not scheduled to be active yet. Scheduled sessions show up on the sessions tab 5 minutes before the scheduled time.
  • It’s set as Unlisted, only attendees who have the Session URL sent to them by the Organizer can find and watch the Session during the event.
  • Or it’s set as viewable to specific ticket holders only and your type of ticket is not one of the specified tickets.

Q: I have multiple Sessions scheduled for the same time, how do I change their order in the Schedule?

A: At this time, scheduled sessions to begin at the same time appear in random order.

Q: Can I disable the Sessions and just have Stage or Networking for my event?

A: Absolutely! You can disable any of the main event areas (Stage, Sessions, Networking and Expo) through the Key details tab of your event dashboard.

Feel free to reach out to us at [email protected] in case you have questions or need assistance.

Did this answer your question?